Girl Geekette

0  Connection successful!
2  The system cannot find the file specified.
5  Access Denied.
5  Invalid Procedure Call.
6  Stack overflow.
20  The system cannot find the device specified.
71  No more connections allowed.
380  Invalid Property Value.
600  An operation is pending.
601  The port handle is invalid.
602  The port is already open.
603  Caller’s buffer is too small.
604  Wrong information specified.
605  Cannot set port information.
606  The port is not connected.
607  The event is invalid.
608  The device does not exist.
609  The device type does not exist.
610  The buffer is invalid.
611  The route is not available.
612  The route is not allocated.
613  Invalid compression specified.
614  Out of buffers.
615  The port was not found.
616  An asynchronous request is pending.
617  The port or device is already disconnecting.
618  The port is not open.
619  The port is disconnected.
620  There are no endpoints.
621  Cannot open the phone book file.
622  Cannot load the phone book file.
623  Cannot find the phone book entry.
624  Cannot write the phone book file.
625  Invalid information found in the phone book.
626  Cannot load a string.
627  Cannot find key.
628  The port was disconnected.
629  The port was disconnected by the remote machine.
630  The port was disconnected due to hardware failure.
631  The port was disconnected by the user.
632  The structure size is incorrect.
633  The port is already in use or is not configured for Remote Access dialout.
634  Cannot register your computer on the remote network.
635  Unknown error.
636  The wrong device is attached to the port.
637  The string could not be converted.
638  The request has timed out.
639  No asynchronous net available.
640  A NetBIOS error has occurred.
641  The server cannot allocate NetBIOS resources needed to support the client.
642  One of your NetBIOS names is already registered on the remote network.
643  A network adapter at the server failed.
644  You will not receive network message popups.
645  Internal authentication error.
646  The account is not permitted to log on at this time of day.
647  The account is disabled.
648  The password has expired.
649  The account does not have Remote Access permission.
650  The Remote Access server is not responding.
651  Your modem (or other connecting device) has reported an error.
652  Unrecognized response from the device.
653  A macro required by the device was not found in the device .INF file section.
654  A command or response in the device .INF file section refers to an undefined macro
655  The <message> macro was not found in the device .INF file section.
656  The <defaultoff> macro in the device .INF file section contains an undefined macro
657  The device .INF file could not be opened.
658  The device name in the device .INF or media .INI file is too long.
659  The media .INI file refers to an unknown device name.
660  The device .INF file contains no responses for the command.
661  The device .INF file is missing a command.
662  Attempted to set a macro not listed in device .INF file section.
663  The media .INI file refers to an unknown device type.
664  Cannot allocate memory.
665  The port is not configured for Remote Access.
666  Your modem (or other connecting device) is not functioning.
667  Cannot read the media .INI file.
668  The connection dropped.
669  The usage parameter in the media .INI file is invalid.
670  Cannot read the section name from the media .INI file.
671  Cannot read the device type from the media .INI file.
672  Cannot read the device name from the media .INI file.
673  Cannot read the usage from the media .INI file.
674  Cannot read the maximum connection BPS rate from the media .INI file.
675  Cannot read the maximum carrier BPS rate from the media .INI file.
676  The line is busy.
677  A person answered instead of a modem.
678  There is no answer.
679  Cannot detect carrier.
680  There is no dial tone.
681  General error reported by device.
682  ERROR WRITING SECTIONNAME
683  ERROR WRITING DEVICETYPE
684  ERROR WRITING DEVICENAME
685  ERROR WRITING MAXCONNECTBPS
686  ERROR WRITING MAXCARRIERBPS
687  ERROR WRITING USAGE
688  ERROR WRITING DEFAULTOFF
689  ERROR READING DEFAULTOFF
690  ERROR EMPTY INI FILE
691  Access denied because username and/or password is invalid on the domain.
692  Hardware failure in port or attached device.
693  ERROR NOT BINARY MACRO
694  ERROR DCB NOT FOUND
695  ERROR STATE MACHINES NOT STARTED
696  ERROR STATE MACHINES ALREADY STARTED
697  ERROR PARTIAL RESPONSE LOOPING
698  A response keyname in the device .INF file is not in the expected format.
699  The device response caused buffer overflow.
700  The expanded command in the device .INF file is too long.
701  The device moved to a BPS rate not supported by the COM driver.
702  Device response received when none expected.
703  ERROR INTERACTIVE MODE
704  ERROR BAD CALLBACK NUMBER
705  ERROR INVALID AUTH STATE
706  ERROR WRITING INITBPS
707  X.25 diagnostic indication.
708  The account has expired.
709  Error changing password on domain.
710  Serial overrun errors were detected while communicating with your modem.
711  RasMan initialization failure. Check the event log.
712  Biplex port is initializing. Wait a few seconds and redial.
713  No active ISDN lines are available.
714  Not enough ISDN channels are available to make the call.
715  Too many errors occurred because of poor phone line quality.
716  The Remote Access IP configuration is unusable.
717  No IP addresses are available in the static pool of Remote Access IP addresses.
718  PPP timeout.
719  PPP terminated by remote machine.
720  No PPP control protocols configured.
721  Remote PPP peer is not responding.
722  The PPP packet is invalid.
723  The phone number, including pre and suf, is too long.
724  The IPX protocol cannot dial-out on the port because the computer is an IPX router.
725  The IPX protocol cannot dial-in on the port because the IPX router is not installed..
726  The IPX protocol cannot be used for dial-out on more than one port at a time.
727  Cannot access TCPCFG.DLL.
728  Cannot find an IP adapter bound to Remote Access.
729  SLIP cannot be used unless the IP protocol is installed.
730  Computer registration is not complete.
731  The protocol is not configured.
732  The PPP negotiation is not converging.
733  The PPP control protocol for this network protocol is not available on the server.
734  The PPP link control protocol terminated..
735  The requested address was rejected by the server..
736  The remote computer terminated the control protocol.
737  Loopback detected..
738  The server did not assign an address.
739  The remote server cannot use the Windows NT encrypted password.
740  The TAPI devices configured for Remote Access failed to initialize or were not installed correctly.
741  The local computer does not support encryption.
742  The remote server does not support encryption.
743  The remote server requires encryption.
744  Cannot use the IPX net number assigned by the remote server. Check the event log.
745  An essential file is missing.
746  An essential file failed to initialize.
747  MAC not found.
748  The system timed out while trying to load an essential file.
749  Invalid phone number.
750  Invalid authentication attempt.
751  The callback number contains an invalid character. Only the following characters are allowed: 0 to 9, T, P, W, (,), -, @, and space
752  A syntax error was encountered while processing a script.
753  The connection could not be disconnected because it was created by the multi-protocol router.
754  The system could not find the multi-link bundle.
755  The system cannot perform automated dial because this entry has a custom dialer specified.
756  This connection is already being dialed.
757  Remote access services could not be started automatically. Additional information is provided in the event log.
758  Internet connection sharing is already enabled on the connection.
760  An error occurred while routing capabilities were being enabled.
761  An error occurred while Internet connection sharing was being enabled for the connection.
763  Internet connection sharing cannot be enabled. There are two or more LAN connections in addition to the connection to be shared.
764  No smart card reader is installed.
765  Internet connection sharing cannot be enabled. A LAN connection is already configured with the IP address required for automatic IP addressing.
766  The system could not find any certificate.
767  Internet connection sharing cannot be enabled. The LAN connection selected on the private network has more than one IP address configured. Reconfigure the LAN connection with a single IP address before enabling Internet connection sharing.
768  The connection attempt failed because of failure to encrypt data.
769  The specified destination is not reachable.
770  The remote machine rejected the connection attempt.
771  The connection attempt failed because the network is busy.
772  The remote computer’s network hardware is incompatible with the type of call requested.
773  The connection attempt failed because the destination number has changed.
774  The connection attempt failed because of a temporary failure. Try connecting again.
775  The call was blocked by the remote computer.
776  The call could not be connected because the destination has invoked the Do Not Disturb feature.
777  The connection attempt failed because the modem on the remote computer is out of order.
778  It was not possible to verify the identity of the server.
779  To dial out using this connection, you must use a smart card.
780  An attempted function is not valid for this connection.
781  The encryption attempt failed because no valid certificate was found.
782  Network Address Translation (NAT) is currently installed as a routing protocol, and must be removed before enabling Internet Connection Sharing
783  Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing
784  You cannot dial using this connection at logon time, because it is configured to use a user name different than the one on the smart card. If you want to use it at logon time, you must configure it to use the user name on the smart card
785  You cannot dial using this connection at logon time, because it is not configured to use a smart card. If you want to use it at logon time, you must edit the properties of this connection so that it uses a smart card
786  The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication
787  The L2TP connection attempt failed because the security layer could not authenticate the remote computer
788  The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer
789  The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer
790  The L2TP connection attempt failed because certificate validation on the remote computer failed
791  The L2TP connection attempt failed because security policy for the connection was not found
792  The L2TP connection attempt failed because security negotiation timed out
793  The L2TP connection attempt failed because an error occurred while negotiating security
794  The Framed Protocol RADIUS attribute for this user is not PPP
795  The Tunnel Type RADIUS attribute for this user is not correct
796  The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed
797  A connection to the remote computer could not be established because the modem was not found or was busy
798  A certificate could not be found that can be used with this Extensible Authentication Protocol
799  Internet Connection Sharing (ICS) cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Please ensure that no other client on the network is configured to use 192.168.0.1
800  Unable to establish the VPN connection. The VPN server may be un-reachable, or security parameters may not be configured properly for this connection
995  Operation aborted.
1382  Maximum length exceeded.
1793  Account expired.
2250  Network connection does not exist.